Hörmann industrial
sectional door
The SPU F42 / SPU 67 Thermo range is Hörmann's industrial benchmark in Luxembourg. Double-skinned polyurethane-foamed steel panels, up to 10,000 mm wide and 8,000 mm high, up to 50,000 cycles as standard and 200,000 with the optional long-life package. The installed SPU 67 Thermo reaches U = 0.51 W/m²K with ThermoFrame - the best thermal insulation in the Hörmann industrial range.
The benchmark for industrial sectional doors
Luxembourg's logistics halls, warehouses and production sites specify the SPU F42 / SPU 67 Thermo for its robustness, thermal insulation and opening speed - three criteria Hörmann has been pushing to the limit for over 30 years.
Up to 200,000 cycles (option)
Construction engineered for heavy-duty industrial use: up to 50,000 cycles as standard (25,000 with normal or low-headroom track) and up to 200,000 with the optional long-life package (reinforced springs, rollers and hardware). We select the version according to your actual cycles per day.
Insulation U = 0.51 W/m²K (SPU 67)
The SPU 67 Thermo uses thermally broken 67 mm sections and EPDM perimeter seals. With the optional ThermoFrame, the installed door reaches U = 0.51 W/m²K (0.62 without ThermoFrame) - the best insulation in the Hörmann industrial range.
Widths up to 10,000 mm
The SPU 67 Thermo covers openings up to 10 m wide and 8 m high (SPU F42: 8 × 7.5 m). For even wider bays, several doors can be placed side by side with intermediate posts.
Opening at up to 1.0 m/s
Driven by the WA 500 FU with frequency inverter, chain transmission unit and 560 control, the door opens at up to 1.0 m/s (0.3 m/s with the WA 500, 0.19 m/s with the WA 300 S4). Ideal for high-intensity logistics flows where every second counts.
RC2 burglar resistance
Optional RC2 certification to DIN/TS 18194: the door withstands standard break-in attempts (simple tools, 3-minute attack).
5 standard safety features
Anti-lift, finger-trap protection, fall-arrest device, closed lateral guidance, double floor seal - all as standard, all compliant with EN 13241 and EN 12453. No additional safety equipment required to meet the regulations.
Hörmann data sheet
Data taken from the Hörmann Industrial Sectional Doors catalogue (internal reference). Values apply to the installed door with standard hardware, excluding specific options.
Four standard configurations
The SPU range comes in 4 catalogue variants from Hörmann - SPU F42 standard, F42 with integrated wicket door, 67 Thermo high-insulation and 67 Thermo with wicket door. Each variant retains the same safety and drive characteristics.
SPU F42
(SPU F42)The benchmark model: 42 mm double-skinned steel panels with PU insulation, good thermal performance for heated or tempered halls. Width 2,000 to 8,000 mm, height up to 7,500 mm. U = 1.0 W/m²K installed (0.94 with ThermoFrame).
- › 42 mm PU
- › U = 1.0 W/m²K
- › Width up to 8,000 mm
- › 200,000 cycles (option)
SPU F42 with wicket door
(SPU F42 with wicket door)Version with integrated threshold-free wicket door (wicket door without a raised threshold) - 940 mm pedestrian clearance, compliant with DIN EN 18040-1 accessibility. Avoids full door opening for frequent foot traffic. Maximum width smaller than on the version without wicket door.
- › 940 mm clearance
- › Threshold-free
- › DIN EN 18040-1 accessibility
- › U = 1.2 W/m²K
SPU 67 Thermo
(SPU 67 Thermo)Thermally broken 67 mm sections, the best thermal insulation in the Hörmann industrial range. Essential for heated halls, cleanrooms and cold stores. Width up to 10,000 mm, height up to 8,000 mm.
- › 67 mm PU
- › U = 0.51 W/m²K installed (ThermoFrame)
- › Width up to 10,000 mm
- › Rw 25 dB
SPU 67 Thermo with wicket door
(SPU 67 Thermo with wicket door)The best-insulated configuration with integrated wicket door. 905 mm threshold-free pedestrian clearance. Ideal for heated workshops with frequent foot traffic. Maximum dimensions smaller than on the version without wicket door.
- › 67 mm PU
- › U = 0.75 W/m²K installed (ThermoFrame)
- › 905 mm clearance
- › Threshold-free
6 compatible Hörmann drives
The SPU F42 / SPU 67 Thermo is operated by the Hörmann industrial drives below (the SupraMatic HT is not intended for 67 mm doors) - from the WA 300 S4 for moderate use to the WA 500 FU with frequency inverter for the most demanding cycle rates. Our team specifies the drive based on your cycles per day and speed requirements.
WA 300 S4
230 V shaft-mounted drive with Soft start / soft stop and integrated force limitation. For moderate use up to 150 cycles per day. The entry-level standard for low-traffic halls.
- › 230 V
- › 0.19 m/s
- › 150 cycles/day max
- › Soft start / soft stop
WA 500
230 V / 400 V shaft-mounted drive, robust construction for intensive use. 12 cycles per hour at 230 V, 15 at 400 V (20 with heavy-duty option). Recommended for production halls and workshops with regular traffic.
- › 230 V / 400 V
- › 0.3 m/s
- › 12 to 15 cycles/hour
- › Heavy-duty use
WA 500 FU
Shaft-mounted drive with frequency inverter, speed up to 1.0 m/s with chain transmission unit and 560 control. 25 cycles per hour (30 with heavy-duty option). The logistics choice: fast flows, frequent openings, thermal efficiency preserved.
- › FU inverter
- › 1.0 m/s
- › 25 (30) cycles/hour
- › chain transmission unit
ITO 500 FU
Rail-mounted drive with frequency inverter. Up to 25 cycles per hour at 0.5 m/s. Ideal for communal garages and underground car parks where lateral space is restricted.
- › Rail-mounted
- › FU inverter
- › 0.5 m/s
- › 25 cycles/hour
SupraMatic HT
Rail drive for communal garages of up to 100 spaces, with patented in-rail locking. Up to 20 cycles per hour. Quiet, economical, suited to residential blocks and office car parks (SPU F42 only, not for 67 mm doors).
- › Rail
- › 0.22 m/s
- › 20 cycles/hour
- › In-rail locking
S140 Direktantrieb
Direct three-phase drive at 1.1 kW with absolute encoder. Up to 10,000 mm wide, 8,000 mm high and 1,080 kg door leaf. For the most demanding installations: large dimensions, precise positioning, reduced maintenance.
- › 400 V three-phase
- › 1.1 kW
- › IP 65
- › Absolute encoder
Planning an industrial sectional doorproject in Luxembourg?
Free on-site technical visit by a specialist industrial engineer. Sizing, lintel check, drive selection and a detailed, free, fast quote. No obligation.
Full European compliance
Every SPU F42 / SPU 67 Thermo installation is delivered with a CE declaration of conformity, commissioning report and technical documentation. The standards covered are as follows.
EN 13241 - Industrial, commercial and garage doors
Harmonised European standard setting out safety and performance requirements for all power-operated doors. Mandatory for CE marking.
EN 13241:2003+A2:2016EN 12453 - Safety in use of power-operated doors
Standard covering safety requirements for the operation of power-operated doors: forces, obstacle detection, push-button controls.
EN 12453:2017DIN/TS 18194 - RC2 burglar resistance
German technical specification for door burglar resistance. Class RC2 = 3-minute resistance to a standard tooled attack.
DIN/TS 18194:2022DIN EN 18040-1 - Accessibility for public buildings
Accessibility requirements for public buildings, particularly for integrated threshold-free wicket doors (wicket door without a raised threshold).
DIN EN 18040-1:20106 sectors where the SPU is the right choice
The SPU F42 / SPU 67 Thermo is engineered for heavy-duty industrial use. These are the 6 sectors where we install it most often in Luxembourg - with the technical reasons behind each choice.
Logistics & distribution centres
High throughput, intensive cycles, opening-speed requirements for loading bays.
Industrial and production halls
Workshops, production halls, engineering sites. Robustness and high cycle counts required.
Heated and refrigerated warehouses
Climate-controlled storage, cleanrooms, cold stores. Thermal insulation is the priority.
Agriculture and farm sheds
Agricultural buildings, equipment sheds, livestock housing. Resistant to external aggression and corrosion.
Public buildings and fire stations
Fire stations, municipal works departments, emergency centres. Speed and reliability are essential.
Communal garages and underground car parks
Residential blocks, office car parks, public car parks. Reduced footprint and quiet operation.
Customisation from the Hörmann catalogue
The SPU can be customised from the Hörmann 2026 catalogue. These are the main options requested by our industrial customers in Luxembourg.
Industrial sectional door budget
Each industrial door is priced on request (free quote), including installation and removal of the existing door. The final cost depends on dimensions, drive and chosen options.
SPU F42 + WA 300 S4
42 mm sectional door, WA 300 S4 drive, standard RAL finish. Moderate use (< 150 cycles/day), agricultural halls, workshops, storage.
- 42 mm insulated steel panel
- WA 300 S4 drive
- 5 standard safety features EN 13241
- Standard RAL finish of choice
- Installation and removal of old door
SPU F42 + WA 500 FU
SPU F42 with WA 500 FU frequency-inverter drive, speed up to 1.0 m/s. The logistics standard: intensive flows, frequent openings, thermal efficiency preserved.
- 42 mm steel panel
- WA 500 FU drive (1.0 m/s)
- ThermoFrame
- CTR code keypad
- Red/green traffic light
- Installation and commissioning
SPU 67 Thermo + WA 500 FU
SPU 67 Thermo with ThermoFrame, WA 500 FU drive. For heated halls, cold stores and cleanrooms where every watt counts.
- 67 mm thermally broken panel
- ThermoFrame (U = 0.51 installed)
- WA 500 FU with Soft start / soft stop
- Two-component quiet rollers
- EPDM perimeter seals
- CE declaration + documentation
The exact cost depends on the precise dimensions, number of doors and drive. Free on-site technical visit in Luxembourg, detailed, free, fast quote.
Request an industrial quoteFrequently asked questions
Answers to our customers' most common questions.
Upgrade to the industrial benchmarkfrom Hörmann
Founded in 2007, Fermelux is an authorised Hörmann installer in Luxembourg. Specialist industrial team, free on-site technical visit, detailed, free, fast quote, installation usually completed in one day. No obligation.