
BiSecur hand transmitters
the complete Hörmann range
From the HS 5 BS with status query to the HSE key-fob models and the large-button HSI 3 BS - every Hörmann BiSecur remote control communicates at 868 MHz with a 128-bit encrypted signal combining fixed code, rolling code and manufacturer key to protect against copying. To control the door from a smartphone, Hörmann also offers the BlueSecur Bluetooth app. Fermelux helps you choose the right model and pairs it with your operator.

Hand transmitters designed for security
Hörmann's BiSecur two-way radio system was designed specifically for garage doors and gates. Unlike generic fixed-code remote controls, each transmission combines a fixed-code part, a rolling-code part and a manufacturer key, with 128-bit encryption - a process certified by the Ruhr-Universität Bochum.
128-bit encryption, two-way system
Every command sent by a BiSecur remote control is encrypted with 128 bits - Hörmann describes it as security equivalent to online banking. The system is two-way: with an HS 5 BS and a bidirectional receiver, the remote can query the door position. The HSE mini remotes are one-way transmitters.
Protection against signal copying
Classic fixed-code remote controls can be copied with cheap equipment available online. The BiSecur signal combines a fixed-code part, a rolling-code part and a manufacturer key, with 128-bit encryption, which protects it against copying. The process was certified by the Ruhr-Universität Bochum.
Range that depends on the surroundings
Hörmann does not guarantee a specific range: local conditions (walls, vehicles, metal structures) affect it. As a guide, retailers quote around 30 m, which is usually enough to open your door from the street or the end of your driveway without leaving the vehicle.
Status feedback on the HS 5 BS
The HS 5 BS remote control has a query button: a green or red LED tells you whether your door is closed or open (with a bidirectional receiver, built into recent Hörmann operators). No more going back to check in bad weather - and you can close it remotely if needed (an additional photocell is required for use without direct line of sight).
Full compatibility with the Hörmann ecosystem
All BiSecur remote controls are interoperable with each other and with Hörmann BiSecur operators, keypads and receivers. A single remote can control the garage door, gate and front door lock - without any conversion accessory.
Long battery life
BiSecur remote controls run on standard batteries depending on the model (CR 2032 for the HSE 4 BS, AAA/LR03 for the HS 5 BS). Battery life depends on how often they are used. The battery can be replaced by the user in seconds, with no special tool.
The specifications of the BiSecur hand transmitters
Official Hörmann data for the complete BiSecur hand transmitter range. Specifications vary slightly depending on the model.
Six BiSecur models, one use for every need
The Hörmann range covers every use: 5-button remote with status feedback, key-fob format, impact-resistant IP 65 version, chrome design model, cigarette-lighter format - and the former HS 4 BS, which we replace with a current model.

HS 4 BS
(HS 4 BS)The former standard 4-button remote of the range, no longer available. If yours is lost or worn, Fermelux replaces it with an HS 5 BS (4 buttons + query) or an HSE 4 BS mini remote, compatible with the same operator.
- › 4 channels
- › AES 128-bit
- › Textured matt black
- › No longer available

HS 5 BS
(HS 5 BS)The premium remote with 4 command buttons and a 5th status-query button. A green/red LED shows whether the door is open or closed (bidirectional receiver required). Available in glossy black or white, or textured matt black.
- › 4 channels + query
- › Status feedback LED
- › Glossy or matt
- › Premium comfort

HSE 4 BS
(HSE 4 BS)The 4-channel key fob hand transmitter with an eyelet to attach to a key ring. Chromed or plastic caps, several colours available (white, anthracite grey, Frozen Grey, Classic Grey, Carbon, silver). Perfect to carry around at all times.
- › 4 channels
- › Key fob eyelet
- › Multi-colours
- › AES 128-bit

HSI 3 BS
(HSI 3 BS)The robust hand transmitter with 3 large buttons, shock-proof housing, IP 65 protection rating. Ideal for intensive use, worksites, outdoor environments or users who want extra-large keys (seniors, PRM).
- › 3 large-button channels
- › Shock-proof IP 65
- › Intensive use
- › PRM ergonomics

HSD 2-C BS
(HSD 2-C BS)The design hand transmitter in a highly chromed key fob format, with 2 functions. Can be worn like a piece of jewellery on a keychain. A compact and elegant version for 2 devices.
- › 2 channels
- › High-end chromed
- › Key fob format
- › Jewellery design

HSZ 1 / HSZ 2 BS
(HSZ 1 BS / HSZ 2 BS)Car-format remote designed to sit in a vehicle's cigarette-lighter socket (it runs on a battery). 1- or 2-button version. Always within reach in the car, without cluttering the sun visor or key ring.
- › 1 or 2 channels
- › Cigarette lighter format
- › Vehicle integration
- › Discreet
Compatible with the whole Hörmann BiSecur range
BiSecur remote controls are natively compatible with all Hörmann operators fitted with the BiSecur protocol. Set to fixed code, they also control older Hörmann 868 MHz operators (2005-2012); for even older models (40 MHz), an external BiSecur receiver provides the upgrade.
SupraMatic 4 E / P
Premium operator for sectional doors. BiSecur as standard, direct pairing of any HS / HSE / HSI / HSD / HSZ hand transmitter.
- › Native BiSecur
- › Sectional doors
- › LED lighting
- › Residential use
ProMatic 4
Standard operator for sectional doors. Native BiSecur, compatible with the complete BiSecur hand transmitter range.
- › Native BiSecur
- › Sectional doors
- › Residential
- › Quiet operation
RotaMatic
Swing gate operator for 1 or 2 leaves, supplied with the HS 5 BS remote. Control via any BiSecur remote, with dedicated gate channels.
- › Native BiSecur
- › Swing gate
- › 1 or 2 leaves
- › Residential
LineaMatic
Operator for sliding gates. Compatible with all BiSecur hand transmitters, multi-channel for garage + gate.
- › Native BiSecur
- › Sliding gate
- › Multi-channel
- › Residential
Your hand transmitters Hörmann BiSecur delivered and paired
Fermelux supplies the complete BiSecur hand transmitter range in Luxembourg, pairs them with your operator, revokes lost old hand transmitters and delivers ready-to-use devices. Free, fast quote.
Hand transmitters certified in Europe
Hörmann BiSecur hand transmitters comply with European radio equipment directives and FIPS encryption standards.
AES 128-bit encryption
Every radio transmission is encrypted with 128 bits (AES, according to an independent analysis), combining fixed code, rolling code and manufacturer key. Hörmann compares this security level to that of online banking.
FIPS 197 AESRED Directive 2014/53/EU
All models comply with the European Radio Equipment Directive (RED). Mandatory CE marking, emission limits and electromagnetic compatibility validated.
Directive 2014/53/EUEN 300 220 standard
European standard governing short-range radio transmitters in the 868 MHz band (SRD). BiSecur hand transmitters are tested and compliant.
EN 300 220Recyclable CR2032 battery
Compliance with European WEEE and RoHS directives on electrical and electronic equipment. Standard button cell recoverable through recycling channels.
WEEE / RoHSWhich hand transmitter for which use
Based on configurations we regularly deploy in Luxembourg. The right choice depends on the number of devices to control, daily use and ergonomic preferences.
Single-family home, 1 car
You have a garage door and sometimes a gate, a single regular driver.
Two-car family
Two drivers, garage door + gate, several children at home.
PRM accessibility / seniors
User with reduced mobility or senior who struggles with small buttons.
Small shop / office
Business premises with garage door or gate, multiple employees coming and going.
Worksite / utility use
Intensive use in dusty or humid environments (mason, craftsman, farmer).
Replacement of a lost hand transmitter
You lost a hand transmitter and wish to replace it by revoking the access of the old one.
The accessories that complete your hand transmitters
Mounting brackets, replacement batteries and complementary devices that extend or simplify the use of BiSecur hand transmitters.
How much does a BiSecur hand transmitter cost in Luxembourg
Indicative budgets excl. VAT for purchase and pairing by Fermelux. Prices include verification of operator compatibility and optional revocation of old hand transmitters.
Hand transmitter alone
A new BiSecur hand transmitter paired with your existing Hörmann operator. Delivery and pairing in workshop or at home.
- 1 BiSecur hand transmitter of your choice
- Operator pairing
- Functional test
- Hörmann warranty
2 to 4 hand transmitter pack
Pack for a family or small office. A mix of HS 5 BS and HSE 4 BS key-fob remotes depending on your needs.
- 2 to 4 hand transmitters
- HS / HSE mix
- Complete pairing
- Optional wall mount
- Hörmann warranty
Complete pack with status feedback
Complete pack with HS 5 BS status feedback, HSI 3 BS shock-proof for intensive use, HSE 4 BS key fob and mounting accessories.
- HS 5 BS with LED
- HSI 3 BS shock-proof IP 65
- 2 HSE 4 BS key fobs
- Wall mount and vehicle clip
- Old memory revocation
- Hörmann warranty
Free, fast quote - Fermelux Luxembourg
Request a hand transmitter quoteFrequently asked questions
Answers to our customers' most common questions.
Your hand transmitters Hörmann BiSecur by Fermelux Luxembourg
Fermelux supplies the whole BiSecur range in Luxembourg, handles pairing, revokes old hand transmitters if needed and advises you on the most suitable model for your use.
